nasiona marihuany

Jak w warunkach domowych sprawdzic zawartosc CBD w konopi - DO PRZETLUMACZENIA.

Wyszukiwarka Forumowa:

#

Obsługa forum
Administrator
Weteran
Rejestracja
Maj 30, 2009
Postów
15,224
Rozwiązań
1
Buchów
16,363
Odznaki
1
Jo,
Tekst Chimery z icmaga. Niech ktos przetlumaczy.
Nie testowalem, przetestuje wkrotce, wyglada ciekawie.

How to detect the presence of CBD, for home growers

http://www.madchat.fr/esprit/texture...nd_edition.pdf

Page # 127The Beam Test****aka****Beam's Test

If you read the section "Colorimetry" in the first paragraph on Page #127 you will see a simplified method for detecting CBD using a spot test called "the Beam test"

The needed reagents are:****

5% KOH(Potassium hydroxide) in 95% ethanol
(5g KOH in 100 ml 95% ethanol)

Petroleum ether, Naptha or other organic solvent to remove the cannabinoids from a sample of your choosing.****

Place 1-2 grams of your sample flowers in an oven until dry @ 150 degrees Celsius for 5 minutes. Extract in a small glass vessel (shot glass?) for 10 minutes in 10 ml of your Petroleum ether, other organic solvent, naptha, etc.

Filter and remove the leaf material using a coffee filter or similar, catch the liquid extract

Take 1 ml of the extract and dry on a white porcelain dish like an egg cup, saucer, or similar. (Gently heat the dish to evaporate the liquid phase of the extract). You will have a dish with remnants of resin leftover once the liquid has evaporated.

Place 5 drops of your 5% KOH in ethanol solution on your plate, and wait about 10 minutes. You will see a distinct violet/purple/pink color from samples containing CBD which could be Chemotype II or III plants - in the case of CBD Lullaby they will be only Type I and II plants- THC only plants (chemotype i) will not show this colour.

It's a relatively simple test and anyone can do it, you just need to order KOH from Amazon or your local soap making store and pick up a solvent from your local hardware store. The ethanol will probably be the most difficult thing to source, but it is available as "Everclear" or 190 proof ethyl alcohol from your local provincial or state run liquor store, depending on your location.

Hope that comes in handy....
-Chimera
 

$enior

Well-known member
Rejestracja
Kwi 3, 2014
Postów
353
Buchów
25
Potrzebne odczynniki:
-5% KOH(wodorotlenek potasu) w 95% etanolu
(5g KOH w 100ml 95% etanolu)
-Eter, nafta, albo inny rozpuszczalnik, potrzebny do usunięcia kanabinoidów.

Rozkruszony KOH łatwiej się rozpuści w alkoholu.

1. Wsadź 1-2 grama topów do piekarnika na 150 stopni, na 5 minut w celu wyschnięcia.
2. Umieść w małym szklanym naczyniu (np.kieliszku) razem z 10ml rozpuszczalnika na 10 minut.
3. Przefiltruj używając filtra do kawy albo czegoś podobnego. Zostaw ciekły ekstrakt.
4. 1ml powstałej cieczy odparuj na białym, ceramicznym naczyniu.
5. Na pozostałą na naczyniu żywicę upuść 5 kropel swojego roztworu KOH.

Zobaczysz wyraźny, fioletowy/różowy kolor jeśli kwiaty zawierały CBD.
Różowy=mniej
Fiolet=więcej
Jeśli nie ma CBD, nie będzie kolorowo.

Fenotyp I to tylko THC.
II mix CBD/THC.
III dużo CBD, bez THC.

http://www.madchat.fr/esprit/textur...uana_Chemistry-Michael_Starks_2nd_edition.pdf
 



Z kodem HASZYSZ dostajesz 20% zniżki w sklepie Growbox.pl na wszystko!

nasiona marihuany
Góra Dół